Hi,
I establish connection to wepRepl ( using password ) .
after successful connection - I can not enter any text. why is that ?
Can't enter text after connecting WebRepl
Can't enter text after connecting WebRepl
Last edited by guyd on Fri Oct 12, 2018 7:03 pm, edited 1 time in total.
Re: Can't enter text after connecting WebRepl
Is there any code executed at that moment?
Re: Can't enter text after connecting WebRepl
That is good question, try pressing CTRL-C and you will stop eg. endless while loops.
Pico-W Access Point static file webserver:
https://github.com/Hermann-SW/pico-w
Tiny MicroPython robots (the PCB IS the robot platform)
viewtopic.php?f=5&t=11454
webrepl_client.py
https://github.com/Hermann-SW/webrepl#webrepl-shell
https://github.com/Hermann-SW/pico-w
Tiny MicroPython robots (the PCB IS the robot platform)
viewtopic.php?f=5&t=11454
webrepl_client.py
https://github.com/Hermann-SW/webrepl#webrepl-shell
Re: Can't enter text after connecting WebRepl
I need to run a check to reproduce my experience, but I recall similar behavior when I was testing pcd8544 with my ESP-12F - Ctrl-C did not help.
Will get back with the details on driver and the code.
UPD:
just double checked my code - WebREPL responds to Ctrl-C as it should be. Not sure why I got this impression that Ctrl-C did not work.
Will get back with the details on driver and the code.
UPD:
just double checked my code - WebREPL responds to Ctrl-C as it should be. Not sure why I got this impression that Ctrl-C did not work.