I tried this library: https://github.com/catdog2/mpy_bme280_e ... /bme280.py, not for a specific reason. The device was connected to;
Code: Select all
BME280 LoPy
-----------------------
VIN 3.3V
GND GND
SDA P9 (aka G16)
SCL P10 (aka G17)
Code: Select all
from machine import I2C
from bme280 import *
i2c = I2C()
bme280 = BME280(address=0x76, i2c=i2c)
bme.values
P.S.: I should add the my sensor returns values for relative humidity that are substantially lower than all the other sensors in my drawer (35% instead of ~50%). So I'm trying one of the recalibration procedures now: put it for 4 days into the freezer at -25°C.