EMMC Flash Mounting issues

The official PYBD running MicroPython, and its accessories.
Target audience: Users with a PYBD
User avatar
pythoncoder
Posts: 5956
Joined: Fri Jul 18, 2014 8:01 am
Location: UK
Contact:

Re: EMMC Flash Mounting issues

Post by pythoncoder » Sat Jun 01, 2019 10:09 am

mnelsoneorm wrote:
Sat Jun 01, 2019 6:31 am
...
There's no bump, but I did just try to align the connectors and it can only go on one way. One whole end of the board is too long (by like 0.5mm) and bumps into the SD card holder. I guess that would be considered keyed?...
This is the way the other Pyboard D attachments are designed: mechanical interference with the Pyboard precludes incorrect insertion. So I'd consider it keyed.
Peter Hinch
Index to my micropython libraries.

User avatar
fos
Posts: 44
Joined: Sat Feb 18, 2017 3:05 pm
Location: Texas
Contact:

Re: EMMC Flash Mounting issues

Post by fos » Sun Jun 09, 2019 7:37 pm

I just received my EMMC Flash module today. My module does not include the "bump" or alignment key on the corner either. The photo above indicated the proper alignment.

Now on to see if I can format and mount the module.

Thank you,
v/r
Jeff

Post Reply