from network import Sigfox
import socket
# init Sigfox for RCZ1 (Europe)
sigfox = Sigfox(mode=Sigfox.SIGFOX, rcz=Sigfox.RCZ1)
# create a Sigfox socket
s = socket.socket(socket.AF_SIGFOX, socket.SOCK_RAW)
# make the socket blocking
s.setblocking(True)
# configure it as uplink only
s.setsockopt(socket.SOL_SIGFOX, socket.SO_RX, False)
# send some bytes
s.send(bytes([1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12]))
Esta es la respuesta donde aparece el error:
>>>
Uploading project (main folder)...
>>>
>>>
>>> Safe booting device... (see settings for more info)
>>> ets Jun 8 2016 00:22:57
rst:0x7 (TG0WDT_SYS_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff8020,len:8
load:0x3fff8028,len:2176
load:0x4009fa00,len:19760
entry 0x400a05bc
Pycom MicroPython 1.20.2.rc3 [v1.11-2037465] on 2020-02-05; LoPy4 with ESP32
Pybytes Version: 1.3.1
Type "help()" for more information.
>>> Reading file status
No files to upload
Upload done, resetting board...
OKets Jun 8 2016 00:22:57
rst:0x7 (TG0WDT_SYS_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff8020,len:8
load:0x3fff8028,len:2176
load:0x4009fa00,len:19760
entry 0x400a05bc
Smart Provisioning started in the background
See https://docs.pycom.io/smart for details
Traceback (most recent call last):
File "main.py", line 3, in <module>
NameError: name '' isn't defined
Pycom MicroPython 1.20.2.rc3 [v1.11-2037465] on 2020-02-05; LoPy4 with ESP32
Pybytes Version: 1.3.1
Type "help()" for more information.
>>>
Necesito ayuda, Gracias
Cualquier duda o aclaracion mandela para actulizar la información o dar mas datos sobre el problema en cuestion.
MODERATOR NOTE: I approved this post, but please repost in English.
