It's not though. I looked at the code, and it's a very different solution to a very different problem than what I'm facing.kevinkk525 wrote: ↑Tue Apr 28, 2020 9:07 pmThe way the signal is captured still applies. But I see that it isn't explained as well as I remember because I was messaging Peter a lot..
Basically you have to poll a 433MHz signal because interrupts are way too slow. at least on the ESPs.
So, if the issue is interrupts being too slow on MicroPython on the ESPs, then I'll switch to using C code, which works, but is less fun, because interrupts in C are MORE than fast enough on the ESPs.
Nate