If not, how to set the network parameter ?
I try to use
Code: Select all
nic.ifconfig(('192.168.1.103', '255.255.255.0', '192.168.1.1', '8.8.8.8'))
but can't not connect to internet, WIZnet5K device can't detect on router (it should be detected).
I use adafruit_wiznet5k library on CircuitPython success to connect to internet, so the hardware is correct.
https://circuitpython.readthedocs.io/pr ... t/api.html
How should I configure WIZNET5K correctly on MicroPython ?