In other threads it hints that this is possible but it doesn't seem to work.
I'm running the latest stable 1.12 release.
I've ran an access point using this code:
Code: Select all
import network wl_ap = network.WLAN(1) wl_ap.config(essid='PYBD') # set AP SSID wl_ap.config(password='pybd0123') # set AP password wl_ap.config(channel=6) # set AP channel wl_ap.active(1) # enable the AP
But there's no connection using webrepl.
I can ping 192.168.4.1 no issue.
Is there anyway to get REPL over Wi-Fi on the pyboard D? Or better yet rshell?