connecting...
upysh is intended to be imported using:
from upysh import *
To see this help text again, type "man".
upysh commands:
clear, ls, ls(...), head(...), cat(...), newfile(...)
cp('src', 'dest'), mv('old', 'new'), rm(...)
pwd, cd(...), mkdir(...), rmdir(...)
No Wifi setting found
WinnerMicro W600
MicroPython v1.13-100-g3131a6859-dirty on 2020-09-18; WinnerMicro module with W600
Type "help()" for more information.
Still not connected, but here I see new message "No Wifi setting found"
OK
Code: Select all
# put system init code
# print("")
# print(" __ __")
# print(" \ \ /\ / /")
# print(" \ \ / \ / /")
# print(" \ \/ /\ \/ / ")
# print(" \ / \ /")
# print(" / /\ / /\ ")
# print(" / /\ \/ /\ \ ")
# print(" / / \ / \ \ ")
# print(" /_/ \/ \_\ ")
from upysh import *
try:
import wifi_config
from easyw600 import *
connect(wifi_config.WIFI_SSID, wifi_config.WIFI_PASSWD)
ftpserver()
except:
print("No Wifi setting found")
from pye_mp import pye