I'm working on a project where I have 2 pyboard connected on my Macbook . The Mac only sees the latest one connected as a drive making it painful to update the code on both pyboards at the same time. I 'm able to have the REPL on both as both pyboard show up when I do
Code: Select all
ls /dev/tty.usb*
/dev/tty.usbmodem2075319E4E532 /dev/tty.usbmodem2081319D4E532
Code: Select all
diskutil list
/dev/disk0 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.3 GB disk0
1: EFI EFI 314.6 MB disk0s1
2: Apple_APFS Container disk1 500.0 GB disk0s2
/dev/disk1 (synthesized):
#: TYPE NAME SIZE IDENTIFIER
0: APFS Container Scheme - +500.0 GB disk1
Physical Store disk0s2
1: APFS Volume Macintosh HD 11.2 GB disk1s1
2: APFS Volume Macintosh HD - Data 54.6 GB disk1s2
3: APFS Volume Preboot 82.9 MB disk1s3
4: APFS Volume Recovery 528.9 MB disk1s4
5: APFS Volume VM 1.1 GB disk1s5
/dev/disk2 (external, physical):
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *245.8 KB disk2
1: DOS_FAT_12 PYBFLASH 114.7 KB disk2s1
Thank you for reading
Nicolas