I tried but the RAM/HEAP wasn't enough. I modify the MicroPython driver to get access to the pins/format etc. from the MicroPython side: https://github.com/lemariva/micropython-camera-driver and the new application is here: https://github.com/lemariva/uPyCam
But, when I choose the BMP format, the image size doesn't fit and the board reboots. I need to get a bigger HEAP (main.c file). However, it is not recommended: https://github.com/espressif/esp32-came ... o-remember
ESP32 Camera (ESP32 Cam) Library
-
- Posts: 40
- Joined: Fri Jul 26, 2019 9:40 pm
Re: ESP32 Camera (ESP32 Cam) Library
I installed the prebuilt firmware for OV2640 successfully
How does one get it to respond.
repl won't connect at 9600 baud, and tried other rates
How does one get it to respond.
repl won't connect at 9600 baud, and tried other rates
-
- Posts: 8
- Joined: Wed Jan 20, 2021 9:12 pm
Re: ESP32 Camera (ESP32 Cam) Library
Nice, I'll buy one and try it.