been playing with Micropython for a bit now with ESP 32 and love the ease of use.
Having a few issues trying to get the ports on the Nucleo board to switch on, im probably (most definitely!) doing something wrong.
so im just trying to switch an led for now real basic stuff.
Code: Select all
>>> g = pyb.Pin(pyb.Pin.cpu.A0 ,pyb.Pin.OUT_OD)
>>> g.value(1)
using A0 and a output with open Drain
then setting it to on!
the csv show A0 mapped to PA3 on the stm which is correct
i know its going to be something daft and apologies for that up front. But i cant see what im doing wrong!
any help will be appreciated.