TI CC1352R

Questions and discussion about The WiPy 1.0 board and CC3200 boards.
Target audience: Users with a WiPy 1.0 or CC3200 board.
Post Reply
User avatar
semireg
Posts: 14
Joined: Mon Dec 18, 2017 3:53 pm

TI CC1352R

Post by semireg » Thu May 17, 2018 3:47 pm

Hi,

Does anyone know if the new dual-radio chip from TI, the CC1352R, would be a good candidate for uPy porting?

From the spec sheet: CC1352R SimpleLink High-Performance Dual-Band Wireless MCU ... features a 48 MHz Arm® Cortex®-M4F Processor, 352KB of In-System Programmable Flash, 256KB of ROM for Protocols and Firmware, 8KB of Cache SRAM (Available as General-Purpose RAM), 80KB of Ultra-Low Leakage SRAM. http://www.ti.com/lit/ds/symlink/cc1352r.pdf

I am not familiar with MicroPython minimum requirements and have a vague understanding of the porting process. There are some details at https://github.com/micropython/micropython/wiki/FAQ. For reference, the uPy-compatibile CC3200 features a ARM® Cortex®-M4 Core at 80 MHz, RAM Up to 256KB.

Post Reply