I don't have wifi in my PC.
accessing uart0 on nodemcu board
Re: accessing uart0 on nodemcu board
Last edited by flywire on Thu Jan 03, 2019 11:49 am, edited 3 times in total.
-
- Posts: 969
- Joined: Sat Feb 03, 2018 7:02 pm
Re: accessing uart0 on nodemcu board
Your PC obviously is connected to the network so that won't be an issue.
Kevin Köck
Micropython Smarthome Firmware (with Home-Assistant integration): https://github.com/kevinkk525/pysmartnode
Micropython Smarthome Firmware (with Home-Assistant integration): https://github.com/kevinkk525/pysmartnode
Re: accessing uart0 on nodemcu board
Note known conflict between os.dupterm and WebREPL: viewtopic.php?f=2&t=5446&hilit=WebREPL+Disconnected and maybe viewtopic.php?f=16&t=2929&hilit=WebREPL+Disconnected.kevinkk525 wrote: ↑Mon Dec 24, 2018 2:12 pmIf you write: uos.dupterm(None, 1)
you disable the terminal output to UART so of course you dont see anything. Use the webrepl.
-
- Posts: 969
- Joined: Sat Feb 03, 2018 7:02 pm
Re: accessing uart0 on nodemcu board
Interesting, did not remember that..
Kevin Köck
Micropython Smarthome Firmware (with Home-Assistant integration): https://github.com/kevinkk525/pysmartnode
Micropython Smarthome Firmware (with Home-Assistant integration): https://github.com/kevinkk525/pysmartnode