Bridges - PC as an ESP32 simulator ?
Pretend your PC a Raspberry Pi or an ESP32 to connect I2C / SPI / GPIO / UART peripherals.
Hello,
I wrote a package for PC, in order to:
1. Use the PC to drive (via bus-converter) I2C / SPI / GPIO / UART interfaced peripheral devices.
2. On your PC, simulating the I2C / SPI / GPIO / UART intreface objects of ESP32 / Raspberry, in order to develop the peripheral device drivers in the PyCharm environment, you can set breakpoints and inspect variables easily. No more "print" to debug, no more repeatedly uploading code to the controller.
https://github.com/Wei1234c/Bridges/blo ... adme_en.md
Regards.
Wei Lin
PC as an ESP32 simulator ?
PC as an ESP32 simulator ?
Last edited by Wei Lin on Wed Apr 03, 2019 3:31 pm, edited 2 times in total.
-
- Posts: 363
- Joined: Sun Apr 17, 2016 1:55 pm
Re: PC as an ESP32 simulator ?
That is great!
Re: PC as an ESP32 simulator ?
If we had debugging on uPy this wouldn’t be necessary.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Re: PC as an ESP32 simulator ?
That is pretty neat.
Re: PC as an ESP32 simulator ?
This article explains more on why it is worth doing.